CLC number: TB126
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 0000-00-00
Cited: 0
Clicked: 6929
Dyakowski Tom. Application of electrical capacitance tomography for imaging industrial processes[J]. Journal of Zhejiang University Science A, 2005, 6(12): 1374-1378.
@article{title="Application of electrical capacitance tomography for imaging industrial processes",
author="Dyakowski Tom",
journal="Journal of Zhejiang University Science A",
volume="6",
number="12",
pages="1374-1378",
year="2005",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2005.A1374"
}
%0 Journal Article
%T Application of electrical capacitance tomography for imaging industrial processes
%A Dyakowski Tom
%J Journal of Zhejiang University SCIENCE A
%V 6
%N 12
%P 1374-1378
%@ 1673-565X
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.A1374
TY - JOUR
T1 - Application of electrical capacitance tomography for imaging industrial processes
A1 - Dyakowski Tom
J0 - Journal of Zhejiang University Science A
VL - 6
IS - 12
SP - 1374
EP - 1378
%@ 1673-565X
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.A1374
Abstract: electrical tomography is, in certain cases, the most attractive method for real imaging of industrial processes, because of its inherent simplicity, rugged construction of the tomographer and high-speed capability. This paper presents examples illustrating applications of electrical tomography for imaging fluidized beds, bubble columns and pneumatic conveyors. electrical tomography opens up new ways for processing, imaging and modelling multi-phase flows as shown by 2D and 3D images illustrating the various types of flow morphology.
[1] Dyakowski, T., Edwards, R.B., Xie, C.G., Williams, R.A., 1997. Application of capacitance tomography to gas-solids flows. Chemical Engineering Science, 52:2099-2110.
[2] George, D.L., Torczynski, J.R., Shollenberger, K.A., O’Hern, T.J., Ceccio, S.L., 2000. Validation of electrical-impedance tomography for measurements of material distribution in two-phase flows. International Journal of Multiphase Flow, 26:549-581.
[3] Halow, J.S., Nicoletti, P., 1992. Observation of fluidized bed coalescence using capacitance imaging. Power Technology, 69:255-277.
[4] Halow, J.S., Fasching, G.E., Nicoletti, P., 1993. Observation of a fluidized bed using capacitance imaging. Chemical Engineering Science, 48:643-659.
[5] Jaworski, A.J., Dyakowski, T., 2001. Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system. Measurement Science and Technology, 12:1-11.
[6] Makkawi, Y.T., Wright, P.C., 2004. Tomographic analysis of dry and semi-wet bed fluidization: the effect of small liquid loading and particle size on the bubbling behaviour. Chemical Engineering Science, 59:201-213.
[7] McKeen, T., Pugsley, T., 2003. Simulation and experimental validation of a freely bubbling bed of FCC catalyst. Powder Technology, 129:139-152.
[8] Pugsley, T., Tanfara, H., Malcus, S., Cui, H., Chaouki, J., Winters, C., 2003. Verification of fluidized bed electrical capacitance tomography measurement with a fibre optic probe. Chemical Engineering Science, 58:3923-3934.
[9] Wang, S.J., 1998. Measurement of Fluidization Dynamics in Fluidized Beds Using Capacitance Tomography. Ph.D Thesis, UMIST, Manchester, UK.
[10] Wang, S.J., Dyakowski, T., Xie, C.G., Williams, R.A., Beck, M.S., 1995. Real time capacitance imaging of bubble formation at the distributor of a fluidized bed. Chemical Engineering Science, 56:95-100.
[11] Warsito, W., Fan, L.S., 2001. Measurement of real-time flow structures in gas-liquid and gas-liquid-solid flow systems using electrical capacitance tomography (ECT). Chemical Engineering Science, 56:6455-6462.
[12] Warsito, W., Fan, L.S., 2003. ECT imaging of three-phase fluidized bed based on three-phase capacitance model. Chemical Engineering Sciences, 58:823-832.
[13] White, R.B., 2003. Using Electrical Capacitance Tomography to Investigate Gas Solid Contracting. Proceedings of 3rd World Congress on Industrial Process Tomography, Banff, Canada, p.840-845.
[14] Williams, R.A., Beck, M.S., 1995. Process Tomography—Principles, Techniques and Applications. Butterworth-Heinemann, Oxford, UK.
Open peer comments: Debate/Discuss/Question/Opinion
<1>
Yahaya@Cranfield University<y.baba@cranfield.ac.uk>
2013-06-19 13:16:03
Researcher in need of this publication