CLC number: TB114.3; O224; O211.6
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 0000-00-00
Cited: 1
Clicked: 5754
LIU Guo-jin, ZHAO Jing-ying, WANG Hai-tao, YANG Chen-guang, SUN Shun-li. Study on reliability technology of contactor relay[J]. Journal of Zhejiang University Science A, 2007, 8(3): 481-484.
@article{title="Study on reliability technology of contactor relay",
author="LIU Guo-jin, ZHAO Jing-ying, WANG Hai-tao, YANG Chen-guang, SUN Shun-li",
journal="Journal of Zhejiang University Science A",
volume="8",
number="3",
pages="481-484",
year="2007",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2007.A0481"
}
%0 Journal Article
%T Study on reliability technology of contactor relay
%A LIU Guo-jin
%A ZHAO Jing-ying
%A WANG Hai-tao
%A YANG Chen-guang
%A SUN Shun-li
%J Journal of Zhejiang University SCIENCE A
%V 8
%N 3
%P 481-484
%@ 1673-565X
%D 2007
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2007.A0481
TY - JOUR
T1 - Study on reliability technology of contactor relay
A1 - LIU Guo-jin
A1 - ZHAO Jing-ying
A1 - WANG Hai-tao
A1 - YANG Chen-guang
A1 - SUN Shun-li
J0 - Journal of Zhejiang University Science A
VL - 8
IS - 3
SP - 481
EP - 484
%@ 1673-565X
Y1 - 2007
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2007.A0481
Abstract: In this paper, the reliability of contactor relay is studied. There are three main parts about reliability test and analysis. First, in order to analyze reliability level of contact relay, the failure ratio ranks are established as index base on the product level. Second, the reliability test method is put forward. The sample plan of reliability compliance test is gained from reliability sample theory. The failure criterion is ensured according to the failure modes of contactor relay. Third, after reliability test experiment, the analysis of failure physics is made and the failure reason is found.
[1] Clark, K., 2004. Distribution Automation to Improve Circuit Reliability. 2004 57th Annual Conference for Protective Relay Engineers, USA, p.91-96.
[2] GB/T15510, 1995. General Rules for Reliability Test of Electromagnetic Relay for Control Circuits (in Chinese).
[3] JB/T10522, 2005. Reliability Test Method for Lower Capacity Alternating Current Contactor (in Chinese).
[4] Li, K., Yao, F., Lu, J.G., Li, Z.G., 2005. Test and analysis of reliability for electromagnetic relay. Chinese Journal of Aeronautics, 18(1):65-71.
[5] Lu, J.G., 1996. Electrical Apparatus Reliability Theory and Application. China Machine Press, Beijing (in Chinese).
[6] MIL-R-39016, 1962. General Specification for Electromagnetic Relay with Reliability Index.
[7] Minoura, N., Soma, T., Sawa, K., 1999. Effect of Erosion and Contact Resistance of Electrical Contacts in N-Hexane on Contact Reliability. Proceedings of the Annual Holm Conference on Electrical Contacts, USA, p.37-43.
[8] Roettjer, P., 2005. Testing techniques to improve relay reliability. Evaluation Engineering, 44(4):44-48.
[9] Teverovsky, A., Sharma, A.K., 2003. Reliability Evaluation of Thermally Actuated Micromachined Relays for Space Applications, Proceedings of SPIE—The International Society for Optical Engineering, USA, 4980:12-21.
[10] van Spengen, W.M., Puers, R., Mertens, R., de Wolf, I., 2003. A low frequency electrical test set-up for the reliability assessment of capacitive RF MEMS switches. Journal of Micromechanics and Microengineering, 13(5):604-612.
Open peer comments: Debate/Discuss/Question/Opinion
<1>