CLC number: TU4
On-line Access: 2024-08-27
Received: 2023-10-17
Revision Accepted: 2024-05-08
Crosschecked: 2010-01-06
Cited: 1
Clicked: 6705
Ressol R. Shakir, Jun-gao Zhu. An examination of the mechanical interaction of drilling slurries at the soil-concrete contact[J]. Journal of Zhejiang University Science A, 2010, 11(4): 294-304.
@article{title="An examination of the mechanical interaction of drilling slurries at the soil-concrete contact",
author="Ressol R. Shakir, Jun-gao Zhu",
journal="Journal of Zhejiang University Science A",
volume="11",
number="4",
pages="294-304",
year="2010",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A0900456"
}
%0 Journal Article
%T An examination of the mechanical interaction of drilling slurries at the soil-concrete contact
%A Ressol R. Shakir
%A Jun-gao Zhu
%J Journal of Zhejiang University SCIENCE A
%V 11
%N 4
%P 294-304
%@ 1673-565X
%D 2010
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A0900456
TY - JOUR
T1 - An examination of the mechanical interaction of drilling slurries at the soil-concrete contact
A1 - Ressol R. Shakir
A1 - Jun-gao Zhu
J0 - Journal of Zhejiang University Science A
VL - 11
IS - 4
SP - 294
EP - 304
%@ 1673-565X
Y1 - 2010
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A0900456
Abstract: Evidence gained from previous field tests conducted on drilled shaft foundation shows that using drilling slurries to stabilize a borehole during the construction may influence the interfacial shear strength. This paper deals with an exhaustive study of the effects of drilling slurries at the contact between soil and concrete. This study involved adapting a simple shear apparatus and performing approximately 100 experimental tests on the interaction between two types of soils; clay and sandy clay and five specimens of concrete with different surface shapes. It also involved using bentonite and polymer slurries as an interface layer between soil and concrete. Results showed that an interface layer of bentonite slurry between clay and concrete decreases the interfacial shear strength by 23% and as an interface layer between sandy clay and concrete, bentonite increases interfacial shear strength by 10%. Using polymer slurry as an interface layer between clay and concrete decreases the interfacial shear strength by 17% while using it as an interface layer between sandy clay and concrete increases the interfacial shear strength by 10%. Furthermore, the data show that using bentonite and polymer slurry as an interface layer between clay and concrete decreases the sliding ratio by 50% to 60%, while increasing the sliding ratio by 44% to 56% when these are used as an interface layer between sandy clay and concrete.
[1]Ata, A., O’Neill, M., 2000. The physicochemical interaction between PHPA polymer slurry and cement mortar. Geotechnical Testing Journal, 23(2):225-235.
[2]Barla, G., Barla, M., Camusso, M., Martinotti, M.E., 2007. Setting up a New Direct Shear Testing Apparatus. The Second Half Century of Rock Mechanics, 11th Congress of the International Society for Rock Mechanics, Lisbon, 1:415-418.
[3]Brown, D., 2002. Effect of construction on axial capacity of drilled foundations in piedmont soils. Journal of Geotechnical and Geoenvironmental Engineering, 128(12):967-973.
[4]Camp, W.M., Brown, D.A., Mayna, P.W., 2002. Construction Methods Effects on Drilled Shaft Axial Performance. Proceedings of the International Deep Foundations Congress, Reston, USA, p.193-208.
[5]Cernak, B., 1973. The Time Effect of Suspension on the Behavior of Piers. Proceedings of Sixth European Conference on Soil Mechanics and Foundation Engineering, Vienna, Austria, p.111-114.
[6]Holden, J.C., 1984. Construction of Bored Piles in Weather Rock, Part 4: Bentonite Construction Procedures. Technical Report No. 6, Road Construction Authority of Victoria, Australia.
[7]Huang, L., Qian, K.M., Pan, B., Asundi, A.K., 2009. Comparison of Fourier transform, windowed Fourier transform, and wavelet transform methods for phase extraction from a single fringe pattern in fringe projection profilometry. Optics and Lasers in Engineering, 48(2):141-148.
[8]Jeong, S., Ahn, S., Seol, H., 2009. Shear load transfer characteristics of drilled shafts socketed in rocks. Rock Mechanics and Rock Engineering.
[9]Kheng, H.W., 1989. Rheological and Physico-chemical Properties of Palygorskite and Anionic Polyacrylamide Polymer Slurries Used in Drilled Shaft Construction. PhD Thesis, University of Florida, Gainsville, USA.
[10]Majano, R.E., O’Neill, M.W., 1993. Effect of Mineral and Polymer Slurries on Perimeter Load Transfer in Drilled Shafts. A Report to ADSC: The International Association of Foundation Drilling, University of Houston.
[11]Majano, R.E., O’Neill, M.W., Hassan, K.M., 1994. Perimeter load transfer in model drilled shafts formed under slurry. Journal of Geotechnical Engineering, ASCE, 120(12):2136-2154.
[12]Nash, K.L., 1974. Stability of trenches filled with fluids. Journal of the Construction Engineering Division, American Society of Civil Engineers, 100(4):533-542.
[13]O’Neill, M.W., Hassan, K.H., 1994. Drilled Shafts: Effects of Construction on Performance and Design Criteria. Proceedings International Conference on Design and Construction of Deep Foundations, U.S. Federal Highway Administration, 1:137-187.
[14]O’Neill, M.W., Reese, L.C., 1999. Drilled shafts: Construction Procedures and Design Methods. The International Association of Foundation Drilling, Publication No. ADSC-TL4, Vol. I.
[15]Pells, P.J.N., Douglas, D.J., Rodway, B., Thorne, C., McMahon, B.K., 1978. Design loadings for foundations in shale and sandstone in the Sydney Region. Australian Geomechanics Journal, 2:31-38.
[16]Reddy, E.S., Chapman, D.N., Saatry, V., 2000. Direct shear interface test for shaft capacity of piles in sand. Geotechnical Testing Journal, 23(2):199-205.
[17]Shakir, R.R., Zhu, J.G., 2009. Behavior of compacted clay concrete interface. Frontiers of Architecture and Civil Engineering in China, 3(1):85-92.
[18]Takeda, M., Mutoh, K., 1983. Fourier transform profilometry for the automatic measurement of 3-D object shapes. Applied Optics, 22(24):3977-3982.
[19]Tsubakihara, Y., Kisheda, H., Nishiyama, T., 1993. Friction between cohesive soils and steel. Soils and Foundations, 33(2):145-156.
[20]Tucker, K.L., Reese, L.C., 1984. The Effect of Bentonitic Slurry on Drilled Shafts. Center for Transportation Research, University of Texas, Austin, USA.
[21]Uesugi, M., Kishida, H., Uchikawa, Y., 1990. Friction between dry sand and concrete under monotonic and repeated loading. Soils and Foundations, 30(1):115-128.
[22]Wang, W., Lu, T.H., 2007. Modeling Experiment on Interface Shearing Behavior between Concrete and Unsaturated Soil with Various Degrees of Saturation. In: Yin, Z.Z., Yuan, J.P., Chiu, A.C.F. (Eds.), Proceeding of the 3rd Asian Conference on Unsaturated soils, Nanjing, China. Science Press, Beijing, p.315-318.
[23]Wates, J.A., Knight, K., 1975. The Effect of Bentonite on the Skin Friction in Cast-in-place Pile and Depth Ram Walls. Proceedings of Sixth Regional Conference for Africa on Soil Mechanics and Foundation Engineering, Durban, South Africa, p.183-188.
[24]Xue, F.G., Seidel, J.P., Haberfield, C.M., Bouazza, A., 2005. Wear of Sandstone Surfaces during Direct Shear Testing of Sandstone/Concrete Joints. Advances in Deep Foundations (GSP 132) Part of Geo-Frontiers Proceedings of the Sessions of the Geo-Frontiers Congress, Austin, Texas, USA.
[25]Yin, Z.Z., Zhu, H., Xu, G.H., 1995. A study of deformation in the interface between soil and concrete. Computers and Geotechnics, 17(1):75-92.
[26]Zhang, B., Fu, J., Yu, Y., Hu, L., 2008. Simple shear test for interfaces between core and filter soils in rock-fill dams. Geotechnical Testing Journal, 31(3):252-260.
[27]Zhang, G., Zhang, J.M., 2009. Numerical modeling of soil-structure interface of a concrete-faced rockfill dam. Computer and Geotechnics, 36(5):762-772.
[28]Zhu, J.G., Yin, J.H., 2001. Drained creep behaviour of soft Hong Kong marine deposits. Geotechnique, 51(5):471-474.
Open peer comments: Debate/Discuss/Question/Opinion
<1>