Similar articles

Abstract: This paper involves a series of destructive full-scale load tests on long bored piles instrumented with strain gauges along the shafts, including two compression and two tension loading tests. The load-displacement response, axial force, skin friction, and the thresholds of the slip displacement for fully mobilizing the skin resistances in different soils are discussed. Moreover, the theoretical solution for estimating the pile tip settlement under compression was adopted to analyze the test results. It was found that the measured skin frictions for the piles under compression were about 6% to 42% higher than the estimated values of the cone penetration tests (CPTs), whereas the measured skin frictions in the uplift cases were about 16% to 50% smaller than the estimated values. In addition, the average limited skin frictions for the tension piles were about 0.36 to 0.78 times the average ultimate skin frictions for the piles under compression. It also can be indicated that the skin friction along the pile depth approached the limited state, and decreased from a peak value with increasing loads.

[1]Ai, Z.Y., Han, J., 2009. Boundary element analysis of axially loaded piles embedded in a multi-layered soil. Computer and Geotechnics, 36(3):427-434.

[2]Das, B.M., 1983. A procedure for estimation of uplift capacity of rough piles. Soils and Foundations, 23(3):122-126.

[3]Guo, W.D., Randolph, M.F., 1999. An efficient approach for settlement prediction of pile groups. Geotechnique, 49(2):161-179.

[4]Han, J., Ye, S.L, 2006. A field study on the behavior of micropiles in clay under compression or tension. Canadian Geotechnical Engineering, 43(1):19-29.

[5]JGJ 106-2003. Technical Code for Testing of Building Foundation Piles. China Construction Industry Press, Beijing, China, p.22-26 (in Chinese).

[6]JGJ 94-2008. Technical Code for Building Pile Foundation. China Architecture and Building Press, Beijing, China, p.33-34 (in Chinese).

[7]Kraft, L.M., Ray, R.P., Kakaaki, T., 1981. Theoretical t-z curves. Journal of Geotechnical Engineering Division, 107(11):1543-1561.

[8]Lai, Y., Jin, G.F., 2010. Uplift behavior and load transfer mechanism of prestressed high-strength concrete piles. Journal of Central South University of Technology, 17(1):136-141.

[9]Prakash, S., Sharma, H.D., 1990. Pile Foundation in Engineering Practice. John Wiley & Sons, New York, USA, p.824.

[10]Randolph, M.F., Wroth, C.P., 1978. Analysis of deformation of vertically loaded pile. Journal of the Geotechnical Engineering Division, 104(12):1465-1488.

[11]Randolph, M.F., Worth, C.P., 1979. An analysis of the vertical deformation of pile groups. Geotechnique, 29(4):423-439.

[12]Said, I., De, G.V., Frank, R., 2009. Axisymmetric finite element analysis of pile loading tests. Computer and Geotechnics, 36(1-2):6-19.

[13]Shanker, K., Basudhar, P.K., Patra, N.R., 2007. Uplift capacity of single piles: predictions and performance. Geotechnical and Geological Engineering, 25(2):151-161.

[14]Xiao, H.B., Luo, Q.Z., Tang, J., Li, Q.S., 2002. Prediction of load-settlement relationship for large-diameter piles. Structure Design of Tall Buildings, 11(4):285-293.

[15]Zhang, Z.M., Zhang, Q.Q., Zhang G.X., 2009. Mechanical properties of uplift pile in soft soils. Journal of Zhejiang University (Engineering Science), 43(11):2114-2119 (in Chinese).

[16]Zhang, Z.M., He, J.Y., Zhang, Q.Q., Zeng L.C., 2010. Measured settlements of super-long piles and pile groups for a building of 323 m in height in Wenzhou. Chinese Journal of Geotechnical Engineering, 32(3):330-337 (in Chinese).

[17]Zhu, H., Chang, M.F., 2002. Load transfer curves along bored piles considering modulus degradation. Journal of Geotechnical and Geoenvironmental Engineering, 128(9):764-774.