Full Text:   <4078>

CLC number: O39

On-line Access: 2012-01-18

Received: 2011-07-21

Revision Accepted: 2011-12-14

Crosschecked: 2011-12-29

Cited: 9

Clicked: 7944

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2012 Vol.13 No.2 P.79-90

http://doi.org/10.1631/jzus.A1100196


Effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells


Author(s):  Chu-lin Yu, Zhi-ping Chen, Ji Wang, Shun-juan Yan, Li-cai Yang

Affiliation(s):  Institute of Process Equipment, Zhejiang University, Hangzhou 310027, China

Corresponding email(s):   zhiping@zju.edu.cn

Key Words:  Cylindrical shells, Axial buckling, Plastic, Weld, Reinforcement, Geometric imperfections


Share this article to: More |Next Article >>>

Chu-lin Yu, Zhi-ping Chen, Ji Wang, Shun-juan Yan, Li-cai Yang. Effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells[J]. Journal of Zhejiang University Science A, 2012, 13(2): 79-90.

@article{title="Effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells",
author="Chu-lin Yu, Zhi-ping Chen, Ji Wang, Shun-juan Yan, Li-cai Yang",
journal="Journal of Zhejiang University Science A",
volume="13",
number="2",
pages="79-90",
year="2012",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1100196"
}

%0 Journal Article
%T Effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells
%A Chu-lin Yu
%A Zhi-ping Chen
%A Ji Wang
%A Shun-juan Yan
%A Li-cai Yang
%J Journal of Zhejiang University SCIENCE A
%V 13
%N 2
%P 79-90
%@ 1673-565X
%D 2012
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1100196

TY - JOUR
T1 - Effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells
A1 - Chu-lin Yu
A1 - Zhi-ping Chen
A1 - Ji Wang
A1 - Shun-juan Yan
A1 - Li-cai Yang
J0 - Journal of Zhejiang University Science A
VL - 13
IS - 2
SP - 79
EP - 90
%@ 1673-565X
Y1 - 2012
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1100196


Abstract: 
The effect of weld reinforcement on axial plastic buckling of welded steel cylindrical shells is investigated through experimental and numerical buckling analysis using six welded steel cylindrical shell specimens. The relationship between the amplitude of weld reinforcement and the axial plastic buckling critical load is explored. The effect of the material yield strength and the number of circumferential welds on the axial plastic buckling is studied. Results show that circumferential weld reinforcement represents a severe imperfect form of axially compressed welded steel cylindrical shells and the axial plastic buckling critical load decreases with the increment of the mean amplitude of circumferential weld reinforcement. The material yield strength and the number of circumferential welds are found to have no significant effect on buckling waveforms; however, the axial plastic buckling critical load can be decreased to some extent with the increase of the number of circumferential welds.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Amazigo, J.C., Budiansky, B., 1972. Asymptotic formulas for the buckling stresses of axially compressed cylinders with localized or random axisymmetric imperfections. Journal of Applied Mechanics, 39(1):179-184.

[2]Arbocz, J., Williams, J.G., 1977. Imperfection surveys on a 10-ft-diameter shell structure. AIAA Journal, 15(7):949-956.

[3]Berry, P.A., Rotter, J.M., Bridge, R.Q., 2000. Compression tests on cylinders with circumferential weld depressions. Journal of Engineering Mechanics, 126(4):405-413.

[4]Chen, Z.P., Sun, B., Yu, C.L., Zeng, M., 2009. Finite-element analysis of liquid-storage tank foundations using settlement difference as boundary condition. Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, 221(3):119-127.

[5]Clarke, M.J., Rotter, J.M., 1988. A Technique for the Measurement of Imperfections in Prototype Silos and Tanks. Technical Report No. R565, University of Sydney, Australia.

[6]Ding, X.L., Rotter, J.M., 1992. The Measurement of Imperfections in Full-Scale Steel Silos. International Conference on Bulk Materials Handling and Transportation, Wollongong, Australia, p.467-472.

[7]Donnel, L.H., Wan, C.C., 1950. Effect of imperfections on buckling of thin cylinders and columns under axial compression. Journal of Applied Mechanics, 17(1):73-83.

[8]Elishakoff, I., Vanmanen, S., Vermeulen, P.G., Arbocz, J., 1985. First-order second-moment analysis of the buckling of shells with random initial imperfections. AIAA Journal, 25(8):1113-1117.

[9]Gellin, S., 1979. Effect of axisymmetric imperfection on the plastic buckling of an axially compressed cylindrical shell. Journal of Applied Mechanics, 46(1):125-131.

[10]Holst, J.M.F.G., Rotter, J.M., Calladine, C.R., 1999. Imperfections in cylindrical shells resulting from fabrication misfits. Journal of Engineering Mechanics, 125(4):410-418.

[11]Hornung, U., Saal, H., 2002. Buckling loads of tank shells with imperfections. International Journal of Non-Linear Mechanics, 37(4-5):605-621.

[12]Hübner, A., Teng, J.G., Saal, H., 2006. Buckling behavior of large steel cylinders with patterned welds. International Journal of Pressure Vessels and Piping, 83(1):13-26.

[13]Hutchinson, J.W., Tennyson, R.C., Muggeridge, D.B., 1971. Effect of a local axisymmetric imperfection on the buckling behavior of a circular cylindrical shell under axial compression. AIAA Journal, 9(1):48-52.

[14]Jamal, M., Lahlou, L., Midani, M., Zahrouni, H., Limam, A., Damil, N., Potier-Ferry, M., 2003. A semi-analytical buckling analysis of imperfect cylindrical shells under axial compression. International Journal of Solids and Structures, 40(5):1311-1327.

[15]Koiter, W.T., 1963. The Effect of Axisymmetric Imperfections on the Buckling of Cylindrical Shells under Axial Compression. Proc. Koninklijke Nederlandse Akademie van Wetenschappen, the Netherland, p.265-279 (in Dutch).

[16]Krishnakumar, S., Foster, C.G., 1991. Axial load capacity of cylindrical shells with local geometric defects. Experimental Mechanics, 31(2):104-110.

[17]Lancaster, E.R., Calladine, C.R., Palmer, S.C., 2000. Paradoxical buckling behaviour of a thin cylindrical shell under axial compression. International Journal of Mechanical Sciences, 42(5):843-865.

[18]Mandal, P., Calladine, C.R., 2000. Buckling of thin cylindrical shells under axial compression. International Journal of Solids and Structures, 37(33):4509-4525.

[19]Pircher, M., Bridge, R.Q., 2001. The influence of circumferential weld-induced imperfections on the buckling of silos and tanks. Journal of Constructional Steel Research, 57(5):569-580.

[20]Pircher, M., Wheeler, A., 2003. The measurement of imperfections in cylindrical thin-walled members.Thin-Walled Structures, 41(5):419-433.

[21]Pircher, M., Berry, P.A., Ding, X., Bridge, R.Q., 2001. The shape of circumferential weld-induced imperfections in thin-walled steel silos and tanks. Thin-Walled Structures, 39(12):999-1014.

[22]Rotter, J.M., Teng, J.G., 1989. Elastic stability of cylindrical shells with weld depressions. Journal of Structural Engineering, 115(5):1244-1263.

[23]Schmidt, H., Swadlo, P., 1996. Two Buckling Tests Demonstrating the Influence of the Pattern of Geometrical and Structural Imperfections on the Axial Compressive Buckling Strength of Cylindrical Shells. Proceedings, International Workshop on Imperfections in Metal Silos, INSA, Lyon, France, p.181-190.

[24]Simitses, G.J., 1986. Buckling and postbuckling of imperfect cylindrical shells: a review. Applied Mechanics Reviews, 39(10):1517-1524.

[25]Singer, J., Abramovich, H., 1995. The development of shell imperfection measurement techniques. Thin-Walled Structures, 23(1-4):379-398.

[26]Stoffel, M., 2006. An experimental method for measuring the buckling shapes of thin-walled structures. Thin-Walled Structures, 44(1):69-73. [doi:10.1016/j.tws.2005.08.012]

[27]Teng, J.G., 1996. Buckling of thin shells: Recent advances and trends. Applied Mechanics Reviews, 49(4):263-274.

[28]Teng, J.G., Song, C.Y., 2001. Numerical models for nonlinear analysis of elastic shells with eigenmode-affine imperfections. International Journal of Solids and Structures, 38(18):3263-3280.

[29]Teng, J.G., Lin, X., 2005. Fabrication of small models of large cylinders with extensive welding for buckling experiments. Thin-Walled Structures, 43(7):1091-1114.

[30]White, J.D., Dwight, J.B., 1977. Weld Shrinkage in Large Stiffened Tubulars. Proceedings of a Conference on Residual Stresses in Welded Constructions, the Welding Institute, London, UK, p.337-348.

[31]Yamaki, N., 1984. Elastic Stability of Circular Cylindrical Shells. Elsevier, Amsterdam, North-Holland, p.20-35.

[32]Zhao, Y., 2001. Stability and Strength of Steel Silo Transition Junctions. PhD Thesis, the Hong Kong Polytechnic University, Hong Kong.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE