Full Text:   <4030>

Summary:  <2227>

CLC number: TH137; TP211+.3

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2015-11-10

Cited: 4

Clicked: 5131

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

Bing Xu

http://orcid.org/0000-0003-0236-7896

Jun-hui Zhang

http://orcid.org/0000-0001-5196-5898

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2015 Vol.16 No.12 P.1001-1014

http://doi.org/10.1631/jzus.A1500182


Effect of case drain pressure on slipper/swashplate pair within axial piston pump


Author(s):  Bing Xu, Qian-nan Wang, Jun-hui Zhang

Affiliation(s):  State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China

Corresponding email(s):   bxu@zju.edu.cn, benzjh@zju.edu.cn

Key Words:  Axial piston pump, Slipper/swashplate pair, Case drain pressure, Oil film


Share this article to: More <<< Previous Article|

Bing Xu, Qian-nan Wang, Jun-hui Zhang. Effect of case drain pressure on slipper/swashplate pair within axial piston pump[J]. Journal of Zhejiang University Science A, 2015, 16(12): 1001-1014.

@article{title="Effect of case drain pressure on slipper/swashplate pair within axial piston pump",
author="Bing Xu, Qian-nan Wang, Jun-hui Zhang",
journal="Journal of Zhejiang University Science A",
volume="16",
number="12",
pages="1001-1014",
year="2015",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1500182"
}

%0 Journal Article
%T Effect of case drain pressure on slipper/swashplate pair within axial piston pump
%A Bing Xu
%A Qian-nan Wang
%A Jun-hui Zhang
%J Journal of Zhejiang University SCIENCE A
%V 16
%N 12
%P 1001-1014
%@ 1673-565X
%D 2015
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1500182

TY - JOUR
T1 - Effect of case drain pressure on slipper/swashplate pair within axial piston pump
A1 - Bing Xu
A1 - Qian-nan Wang
A1 - Jun-hui Zhang
J0 - Journal of Zhejiang University Science A
VL - 16
IS - 12
SP - 1001
EP - 1014
%@ 1673-565X
Y1 - 2015
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1500182


Abstract: 
This paper pertains to case drain pressure limitation for axial piston swashplate pumps used in open-loop circuits. The critical case drain pressure for pumps of this type is considered from the oil film perspective of the slipper/swashplate pair: (1) height of the lubricating oil film, (2) supporting stiffness, and (3) location of the centroid of the equivalent hydrodynamic lifting force. A dynamic lubricating oil film simulation model is established to determine the critical case drain pressure for which the slipper cannot remain in a stable state. Based on the simulation results, the worst condition occurs at the point when the height of the lubricating oil film is the maximum, the supporting stiffness is the minimum, and the distance between the centroid of the equivalent hydrodynamic lifting force and the bottom center of the slipper is the maximum. The slipper is stable only when the difference between the case drain pressure and the suction pressure is within a reasonable range. Subsequently, a design criterion is put forward to specify the reasonable case drain pressure, and this is validated by experimental results.

The research is good and it has a maximum level in this particular field.

壳体压力对轴向柱塞泵滑靴副特性的影响

目的:旨在探索壳体压力对滑靴副特性的影响,期望给出特定泵结构和工况下极限壳体压力的确定准则,提高滑靴运行的可靠性。
创新点:1. 基于滑靴平衡方程,推导出滑靴支撑力等效半径与工况之间的关系;2. 得出离散油膜刚度计算公式;3. 给出评价准则,确定极限壳体压力。
方法:1. 基于滑靴副油膜模型分析不同进口压力和壳体压力对滑靴副油膜厚度、滑靴倾覆角度、油膜刚度和动压支撑力等效作用半径的影响;2. 以动压支撑力等效作用半径小于滑靴外径为评价标准确定泵极限壳体压力。
结论:1. 给定泵结构和工况条件下,油膜厚度和滑靴倾覆角度随着壳体压力的增大而增大;2. 壳体压力增大,高低压过渡区支撑刚度降低,等效动压支撑力作用点向滑靴外缘移动;3. 基于油膜模型提出的壳体压力确定准则可以有效的确定极限壳体压力。

关键词:轴向柱塞泵;滑靴副;壳体压力;油膜

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Borghi, M., Specchia, E., Zardin, B., et al., 2009a. The critical speed of slipper bearings in axial piston swash plate type pumps and motors. ASME Dynamic Systems and Control Conference, American Society of Mechanical Engineers, USA, p.267-274.

[2]Borghi, M., Specchia, E., Zardin, B., 2009b. Numerical analysis of the dynamic behaviour of axial piston pumps and motors slipper bearings. SAE International Journal of Passenger Cars-Mechanical Systems, 2(1):1285-1302.

[3]Canbulut, F., Sinanoğlu, C., Yildirim, Ş., 2004. Analysis of effects of sizes of orifice and pockets on the rigidity of hydrostatic bearing using neural network predictor system. KSME International Journal, 18(3):432-442.

[4]Canbulut, F., Koç, E., Sinanoglu, C., 2009. Design of artificial neural networks for slipper analysis of axial piston pumps. Industrial Lubrication and Tribology, 61(2):67-77.

[5]Chacon, R., 2014. Cylinder Block/Valve Plate Interface Performance Investigation through the Introduction of Micro-surface Shaping. MS Thesis, Purdue University, Indiana, USA.

[6]Grabbel, J., Ivantysynova, M., 2005. An investigation of swash plate control concepts for displacement controlled actuators. International Journal of Fluid Power, 6(2):19-36.

[7]Ivantysyn, R., 2011. Computational Design of Swash Plate Type Axial Piston Pumps a Framework for Computational Design. MS Thesis, Purdue University, Indiana, USA.

[8]Kemmetmüller, W., Fuchshumer, F., Kugi, A., 2010. Nonlinear pressure control of self supplied variable displacement axial piston pumps. Control Engineering Practice, 18(1):84-93.

[9]Kim, D.A., 2012. Contribution to Digital Prototyping of Axial Piston Pumps/Motors. MS Thesis, Purdue University, Indiana, USA.

[10]Kumar Seeniraj, G., 2009. Model Based Optimization of Axial Piston Machines Focusing on Noise and Efficiency. PhD Thesis, Purdue University, Indiana, USA.

[11]Kumar Seeniraj, G., Zhao, M.M., Ivantysynova, M., 2011. Effect of combining precompression grooves, PCFV and DCFV on pump noise generation. International Journal of Fluid Power, 12(3):53-63.

[12]Manring, N.D., 1998. Slipper tipping within an axial-piston swash-plate type hydrostatic pump. ASME International Mechanical Engineering Congress and Exposition, Anaheim, USA, p.169-175.

[13]Manring, N.D., 2001. Predicting the required slipper hold-down force within an axial-piston swash-plate type hydrostatic pump. ASME International Mechanical Engineering Congress and Exposition, New York, USA, 11:2513-2522.

[14]Manring, N.D., 2013. Fluid Power Pumps and Motors: Analysis, Design and Control. McGraw Hill Professional, New York, USA, p.97-104.

[15]Manring, N.D., Mehta, V.S., Nelson, B.E., et al., 2014. Scaling the speed limitations for axial-piston swash-plate type hydrostatic machines. Journal of Dynamic Systems, Measurement, and Control, 136(3):031004.

[16]Pelosi, M., 2012. An Investigation of the Fluid-Structure Interaction of Piston/Cylinder Interface. PhD Thesis, Purdue University, Indiana, USA.

[17]Schenk, A., 2014. Predicting Lubrication Performance between the Slipper and Swashplate in Axial Piston Hydraulic Machines. PhD Thesis, Purdue University, Indiana, USA.

[18]Wondergem, A., 2014. Piston/Cylinder Interface of Axial Piston Machines–Effect of Piston Micro-surface Shaping. MS Thesis, Purdue University, Indiana, USA.

[19]Xu, B., Zhang, J.H., Yang, H.Y., et al., 2013. Investigation on the radial micro-motion about piston of axial piston pump. Chinese Journal of Mechanical Engineering, 26(2):325-333.

[20]Zecchi, M., 2013. A Novel Fluid Structure Interaction and Thermal Model to Predict the Cylinder Block/Valve Plate Interface Performance in Swash Plate Type Axial Piston Machines. PhD Thesis, Purdue University, Indiana, USA.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE