Similar articles

Abstract: Many railway turnouts are often installed near metro depots and stations, leading to significant environmental vibrations reaching nearby infrastructure. Vibration in turnout zones can originate from various sources, such as rail joints, wheel-load transitions, uneven stiffnesses, rail corrugation, and small-radius curves. These factors contribute to turnout zones having considerably higher vibration levels than plain track sections. Additionally, in urban rapid transit systems, higher train speeds exacerbate wheel–;rail impact excitation, further intensifying such vibrations. Despite turnout zones accounting for a large share of environmental vibrations, there have been few systematic studies on their specific sources and mechanisms in the context of rapid transit systems. This knowledge gap has hindered the development and optimization of vibration mitigation strategies for turnout structures. Therefore, in this study, we investigate five representative sets of turnouts from a rapid transit system in a Chinese city, with train speeds ranging from 80 to 150 km/h. Field tests were conducted on real operating trains, with vibration accelerations measured at turnout rails and tunnel walls. This study systematically examines the effects of turnout structure, train carriage position, speed, and vibration mitigation measures on the vibration source characteristics. Time-frequency methods were employed to analyze the test data. Our findings reveal that when train speeds exceed 100 km/h, leading and trailing carriages passing through turnouts induce low-frequency vibrations below 80 Hz, thus generating vibrations in the human-sensitive frequency range. Moreover, train-induced vibrations in turnout zones are primarily concentrated in three frequency bands: 0–20 Hz (associated with structural and stiffness irregularities in the turnouts), 50–80 Hz (P2 resonance of the wheel–;rail system), and 150–200 Hz (natural frequencies of the rails).

城市快速轨道交通道岔区轮轨冲击振动源特性试验研究

[1]AuerschL, SaidS, MuellerR, 2017. Measurements on the vehicle-track interaction and the excitation of railway-induced ground vibration. Procedia Engineering, 10th International Conference on Structural Dynamics (EURODYN).

[2]BaoXH, XiaZF, YeGL, et al., 2017. Numerical analysis on the seismic behavior of a large metro subway tunnel in liquefiable ground. Tunnelling and Underground Space Technology, 66:91-106.

[3]BruniS, AnastasopoulosI, AlfiS, et al., 2009. Effects of train impacts on urban turnouts: modelling and validation through measurements. Journal of Sound and Vibration, 324(3-5):666-689.

[4]ChenJ, GengJL, GaoGY, et al., 2022. Mitigation of subway-induced low-frequency vibrations using a wave impeding block. Transportation Geotechnics, 37:100862.

[5]ConnollyDP, KouroussisG, WoodwardPK, et al., 2014. Field testing and analysis of high speed rail vibrations. Soil Dynamics and Earthquake Engineering, 67:102-118.

[6]ConnollyDP, MareckiGP, KouroussisG, et al., 2016. The growth of railway ground vibration problems–a review. Science of the Total Environment, 568:1276-1282.

[7]DaubechiesI, LuJF, WuHT, 2011. Synchrosqueezed wavelet transforms: an empirical mode decomposition-like tool. Applied and Computational Harmonic Analysis, 30(2):243-261.

[8]GaoX, YiQ, LeiJX, et al., 2023. Experimental study on the characteristics of vibration energy propagation in the subway turnout area. Construction and Building Materials, 409:134210.

[9]GaoX, ZhaoCY, YangY, et al., 2024. Long-term efficient control of structure-borne noise inside buildings caused by underground railways by using novel damping fasteners. Transportation Research Record, 2678(2):635-653.

[10]GuoW, BaiZY, WangXB, et al., 2020. A combination strategy of hollow-closed-wall in-filled trench and elastic bearing for reducing environmental vibration induced by high-speed train. Soil Dynamics and Earthquake Engineering, 133:106136.

[11]HuangHY, ZhaoMJ, RongY, et al., 2021. Analysis of the vibration of the ground surface by using the layered soil: viscoelastic Euler beam model due to the moving load. Mathematical Problems in Engineering, 2021:6619197.

[12]ISO (International Organization for Standardization), 2016. Mechanical Vibration—Measurement of Vibration Generated Internally in Railway Tunnels by the Passage of Trains, ISO 10815-2016. ISO, Geneva, Switzerland.

[13]JiangBL, MaM, LiMH, et al., 2019. Experimental study of the vibration characteristics of the floating slab track in metro turnout zones. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 233(10):1081-1096.

[14]KouroussisG, ZhuSY, OlivierB, et al., 2019. Urban railway ground vibrations induced by localized defects: using dynamic vibration absorbers as amitigation solution. Journal of Zhejiang University-SCIENCE A, 20(2):83-97.

[15]LaiJ, XuJM, WangP, et al., 2021. Numerical investigation of dynamic derailment behavior of railway vehicle when passing through a turnout. Engineering Failure Analysis, 121:105132.

[16]LeiJX, GaoX, WangYX, et al., 2024. Vibration characteristics of subway turnout area during vehicle deceleration and assessment of the model accuracy. Measurement, 231:114566.

[17]LeiLJ, MiaoLC, LiC, et al., 2021. Locally resonant periodic wave barriers for vibration isolation in subway engineering. KSCE Journal of Civil Engineering, 25(4):1239-1251.

[18]MathurS, 2020. Impact of transit stations on house prices across entire price spectrum: a quantile regression approach. Land Use Policy, 99:104828.

[19]NorgateSH, Cooper-RyanAM, LavinS, et al., 2020. The impact of public transport on the health of work commuters: a systematic review. Health Psychology Review, 14(2):325-344.

[20]QuXY, MaM, LiMH, et al., 2019. Analysis of the vibration mitigation characteristics of the ballasted ladder track with elastic elements. Sustainability, 11(23):6780.

[21]SadeghiJ, VasheghaniM, 2021. Safety of buildings against train induced structure borne noise. Building and Environment, 197:107784.

[22]SangT, ZhaoCY, WangYH, et al., 2020. Vibration transmission characteristic analysis of the metro turnout area by constant-Q nonstationary Gabor transform. Measurement and Control, 53(9-10):1739-1750.

[23]ShengT, ShiWX, ShanJZ, et al., 2020. Base isolation of buildings for subway-induced environmental vibration: field experiments and a semi-analytical prediction model. The Structural Design of Tall and Special Buildings, 29(16):e1798.

[24]ShengX, JonesCJC, PetytM, 1999. Ground vibration generated by a load moving along a railway track. Journal of Sound and Vibration, 228(1):129-156.

[25]SunHL, ChenAH, ShiL, et al., 2018. Dynamic responses of a twin-tunnel subjected to moving loads in a saturated half-space. Mathematical Problems in Engineering, 2018:6949507.

[26]SunQQ, DiasD, GuoXF, et al., 2019. Numerical study on the effect of a subway station on the surface ground motion. Computers and Geotechnics, 111:243-254.

[27]SunXJ, MaM, JiangBL, et al., 2022. Ground vibration from freight railway: environmental impact and potential mitigation measure at propagation path. Environmental Science and Pollution Research, 29(29):44364-44377.

[28]TakamatsuM, FutatsukaM, SakuraiT, et al., 1982. A study of the extent and scope of local vibration hazards in Japan. Industrial Health, 20(3):177-190.

[29]ThompsonDJ, 2010. Railway Noise and Vibration: Mechanisms, Modelling and Means of Control. Elsevier, Amsterdam, the Netherlands.

[30]WangLC, PingW, ZhaoCY, et al., 2020. An experimental study on the characteristics of vibration source in urban rail transit turnouts. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 234(9):945-957.

[31]WangS, XinT, WangPS, et al., 2022. Numerical study on high-frequency effect of rail corrugation on subway-induced environmental vibrations. Environmental Science and Pollution Research, 29(53):80657-80668.

[32]WangSG, GeJ, WangM, et al., 2015. Experimental study on key technologies of high-speed turnout. Journal of the China Railway Society, 37(1):77-82 (in Chinese).

[33]WenFY, RenZS, SunSG, et al., 2014. ANSYS/DYNA-based study on wheel-rail dynamics of high-speed wheel-turnout system. Journal of the China Railway Society, 36(3):14-18 (in Chinese).

[34]XinT, WangS, GaoL, et al., 2020. Field measurement of rail corrugation influence on environmental noise and vibration: a case study in China. Measurement, 164:108084.

[35]XuJM, WangJ, WangP, et al., 2020. Study on the derailment behaviour of a railway wheelset with solid axles in a railway turnout. Vehicle System Dynamics, 58(1):123-143.

[36]XuR, LiXC, YangW, et al., 2019. Field measurement and research on environmental vibration due to subway systems: a case study in eastern China. Sustainability, 11(23):6835.

[37]YangJJ, ZhuSY, ZhaiWM, et al., 2019. Prediction and mitigation of train-induced vibrations of large-scale building constructed on subway tunnel. Science of the Total Environment, 668:485-499.

[38]ZhengJY, ZhaoCY, ShiDJ, et al., 2024. A method for support stiffness failure identification in a steel spring floating slab track of urban railway: a case study in China. Journal of Zhejiang University-SCIENCE A, 25(3):206-222.

[39]ZhengZG, HuJY, QianY, et al., 2025. The influence of elastic pads deterioration in the fastening system on the dynamic characteristics of the vehicle-turnout system. Engineering Failure Analysis, 167:108936.

[40]ZhouSX, QinZ, SunR, et al., 2017. Study on influence of inter-vehicle longitudinal damper on dynamic performance of high-speed EMU. Journal of the China Railway Society, 39(6):20-27 (in Chinese).

[41]ZouC, WangYM, WangP, et al., 2015. Measurement of ground and nearby building vibration and noise induced by trains in a metro depot. Science of the Total Environment, 536:761-773.