Full Text:
<3184>
CLC number: TB126
On-line Access:
Received: 2005-09-07
Revision Accepted: 2005-09-20
Crosschecked: 0000-00-00
Cited: 0
Clicked: 6237
Ultrasonic tomography and its applications in oilfield
| |||||||||||||
Zhong Xing-fu, Wu Ying-xiang, Li Dong-hui, Li Qiang, Wang Xing-guo. Ultrasonic tomography and its applications in oilfield[J]. Journal of Zhejiang University Science A, 2005, 6(12): 1420-1423.
@article{title="Ultrasonic tomography and its applications in oilfield",
author="Zhong Xing-fu, Wu Ying-xiang, Li Dong-hui, Li Qiang, Wang Xing-guo",
journal="Journal of Zhejiang University Science A",
volume="6",
number="12",
pages="1420-1423",
year="2005",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2005.A1420"
}
%0 Journal Article
%T Ultrasonic tomography and its applications in oilfield
%A Zhong Xing-fu
%A Wu Ying-xiang
%A Li Dong-hui
%A Li Qiang
%A Wang Xing-guo
%J Journal of Zhejiang University SCIENCE A
%V 6
%N 12
%P 1420-1423
%@ 1673-565X
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.A1420
TY - JOUR
T1 - Ultrasonic tomography and its applications in oilfield
A1 - Zhong Xing-fu
A1 - Wu Ying-xiang
A1 - Li Dong-hui
A1 - Li Qiang
A1 - Wang Xing-guo
J0 - Journal of Zhejiang University Science A
VL - 6
IS - 12
SP - 1420
EP - 1423
%@ 1673-565X
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.A1420
Abstract: UTT (ultrasonic tomography Tool) is widely used in the oil industry and can be used to inspect corrosion, casing wall damage, casing breakoff, and casing distortion in the well borehole with the maximum environment temperature being 125 °C, and the pressure being 60 MPa. UTT consists of tool head, upper centralization, electronic section, lower centralization, transmitters, and receivers. Its outer diameter is 4.6 cm and length is 320 cm. The measured casing diameter ranges from 60 mm to 254 mm. The tomography resolution is 512×512. The borehole measurement accuracy is 2 mm. It can supply 3D pipe tomography, including horizontal and vertical profile. This paper introduces its specification, measurement principle, and applications in oilfield.
[1] Liu, Q.Q., 1999. An logging tool of azimuth-wall thickness imaging. Petroleum Instrument, 13(5):25-28 (in Chinese).
[2] Lu, D.W., Xie, R.H., 2002. New Development of Well Logging and Test in Oil Filed. Oil Press, Beijing (in Chinese).
[3] Parilla, M., Anaya, J.J., Fritsch, C., 1991. Digital signal processing for high accuracy ultrasonic range measurements. J. IEEE Transactions on Instrument and Measurement, 40(4):759-763.
[4] Sabatini, A.M., 1995. A digital signal-processing technique for compensating ultrasonic sensors. IEEE Transactions on Instrument and Measurement, 44(4):869-874.
[5] Wang, Y.G., 1989. The precision measurement theory of ultrasonic wave speed and its application. Chinese Sound Technology, 8(2):18-23 (in Chinese).
Open peer comments: Debate/Discuss/Question/Opinion
<1>
Ahmad<max_pavilion05cool@yahoo.co.id>
2010-11-10 16:13:16
I looking for reference of ultrasonic tomography