Full Text:   <1065>

CLC number: TG113

On-line Access: 

Received: 2005-03-23

Revision Accepted: 2005-07-18

Crosschecked: 0000-00-00

Cited: 1

Clicked: 2384

Citations:  Bibtex RefMan EndNote GB/T7714

-   Go to

Article info.
1. Reference List
Open peer comments

Journal of Zhejiang University SCIENCE A 2005 Vol.6 No.100 P.8~16

10.1631/jzus.2005.AS0008


Properties of frictional bridging in fiber pull-out for fiber-reinforced composites


Author(s):  LIU Peng-fei, TAO Wei-ming, GUO Yi-mu

Affiliation(s):  Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, China

Corresponding email(s):   Liupengfei19791226@hotmail.com, Taowm@zju.edu.cn

Key Words:  Fiber pull-out, Energy release rate, Bridging law, Fiber-reinforced composites


LIU Peng-fei, TAO Wei-ming, GUO Yi-mu. Properties of frictional bridging in fiber pull-out for fiber-reinforced composites[J]. Journal of Zhejiang University Science A, 2005, 6(100): 8~16.

@article{title="Properties of frictional bridging in fiber pull-out for fiber-reinforced composites",
author="LIU Peng-fei, TAO Wei-ming, GUO Yi-mu",
journal="Journal of Zhejiang University Science A",
volume="6",
number="100",
pages="8~16",
year="2005",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.2005.AS0008"
}

%0 Journal Article
%T Properties of frictional bridging in fiber pull-out for fiber-reinforced composites
%A LIU Peng-fei
%A TAO Wei-ming
%A GUO Yi-mu
%J Journal of Zhejiang University SCIENCE A
%V 6
%N 100
%P 8~16
%@ 1673-565X
%D 2005
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.2005.AS0008

TY - JOUR
T1 - Properties of frictional bridging in fiber pull-out for fiber-reinforced composites
A1 - LIU Peng-fei
A1 - TAO Wei-ming
A1 - GUO Yi-mu
J0 - Journal of Zhejiang University Science A
VL - 6
IS - 100
SP - 8
EP - 16
%@ 1673-565X
Y1 - 2005
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.2005.AS0008


Abstract: 
Stress equilibrium equations, boundary- and continuity-conditions were used to establish a theoretical model of progressive debonding with friction at the debonded interface. On a basis of the minimum complementary energy principle, an expression for the energy release rate G was derived to explore the interfacial fracture properties. An interfacial debonding criterion GΓi was introduced to determine the critical debond length and the bridging law. Numerical calculation results for fiber-reinforced composite SCS-6/Ti-6Al-4V were compared with those obtained by using the shear-lag models.

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1] Begley, M.R., McMeeking, R.M., 1995. Numerical analysis of fibre bridging and fatigue crack growth in metal matrix composite materials. Materials Science and Engineering, 200(1-2):12-20.

[2] Budiansky, B., Cui, Y.L., 1995. Toughening of ceramics by short aligned fibers. Mechanics of Materials, 21(2):139-146.

[3] Chiang, Y.C., 2001. On fiber debonding and matrix cracking in fiber-reinforced ceramics. Composites Science and Technology, 61(12):1743-175.

[4] Hampe, A., Kalinka, G., Meretz, S., 1995. An advanced equipment for single-fibre pull-out test designed to monitor the fracture process. Composites, 26(1):40-46.

[5] Honda, K., Kagawa, Y., 1996. Debonding criterion in the pushout process of fiber-reinforced ceramics. Acta Materialia, 44(8):3267-3277.

[6] Hsueh, C.H., 1996. Crack-wake interfacial debonding criteria for fiber-reinforced ceramic composites. Acta Materialia, 44(6):2211-2216.

[7] Liu, Y.F., Kagawa, Y., 2000. The energy release rate for an interfacial debond crack in a fiber pull-out model. Composites Science and Technology, 60(2):167-171.

[8] Marshall, M.B., Cox, B.N., 1998. A-J-integral method for calculating steady-state matrix cracking stresses in composites. Mechanics of Materials, 17(1):127-136.

[9] McCartney, L.N., 2005. Energy-based prediction of failure in general symmetric laminates. Engineering Fracture Mechanics, 72(6):909-930.

[10] Ochiai, S., Hojo, M., Inoue, T., 1999. Shear-lag simulation of the progress of interfacial debonding in unidirectional composites. Composites Science and Technology, 59(1):77-88.

[11] Preuss, M., Rauchs, G., Doel, T.J.A., 2003. Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites. Acta Materialia, 51(4):1045-1057.

[12] Rauchs, G., Withers, P.J., 2002. Computational assessment of the influence of load ratio on fatigue crack growth in fibre-reinforced metal matrix composites. International Journal of Fatigue, 24(12):1205-1211.

[13] Warrier, S.G., Maruyama, B., Majumdar, B.S., 1999. Behavior of several interfaces during fatigue crack growth in SiC/Ti-6Al-4V composites. Materials Science and Engineering, 259(2):189-200.

[14] Wu, W., Verpoest, I., Varna, J., 1998. A novel axisymmetric variational analysis of stress transfer into fibres through a partially debonded interface. Composites Science and Technology, 58(12):1863-1877.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - Journal of Zhejiang University-SCIENCE