Abstract: The bleed hole diameter, depth, and boundary layer thickness are key design parameters of a supersonic bleed system. The evolution trend of single-hole bleed flow coefficient with the ratio of boundary layer thickness to bleed hole diameter and the ratio of bleed hole depth to diameter is investigated by numerical simulations under choking and non-choking conditions. The results show that the subsonic leading edge of the circular hole and the subsonic part of the boundary layer are the main factors causing lateral flow of the bleed hole. The effect of diameter on bleed mass flow rate is due to the viscous effect which reduces the effective diameter. The larger the ratio of displacement thickness to bleed hole diameter, the more obvious the viscous effect is. The depth affects bleed flow rate by changing the opening and closing states of the separation zone. When a certain depth is reached, the development of the boundary layer reduces the effective captured stream tube and thus reduces the bleed mass flow rate. The main objective of the study is to obtain the physical mechanism of the bleed hole size parameters affecting the bleed mass flow rate, and to provide theoretical guidance for the selection of the size of bleed holes in the design of a porous arrays bleed system in hypersonic inlets.

抽吸孔尺度对超声速边界层抽吸流量的影响

[1]Anderson JD, 2003. Modern Compressible Flow: with Historical Perspective, 3rd Edition. McGraw Hill Education, New York, USA, p.127-187.

[2]Babinsky H, Harvey JK, 2011. Shock Wave-Boundary-Layer Interactions. Cambridge University Press, Cambridge, UK, p.5-86.

[3]Bodner JP, Greber I, Davis DO, et al., 1996. Experimental investigation of the effect of a single bleed hole on a supersonic turbulent boundary-layer. Proceedings of the 32nd Joint Propulsion Conference and Exhibit.

[4]Bunnag S, 2010. Bleed Rate Model Based on Prandtl-Meyer Expansion for a Bleed Hole Normal to a Supersonic Freestream. MS Thesis, University of Cincinnati, Cincinnati, USA.

[5]Chang JT, Li N, Xu KJ, et al., 2017. Recent research progress on unstart mechanism, detection and control of hypersonic inlet. Progress in Aerospace Sciences, 89:1-20.

[6]Davis DO, Willis BE, Schoenenberger M, 1997. Porous and microporous honeycomb composites as potential boundary-layer bleed materials. Proceedings of the 33rd Joint Propulsion Conference and Exhibit.

[7]Davis DO, Vyas M, Slater J, 2012. Research on supersonic inlet bleed. Proceedings of the 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

[8]Eichorn MB, Barnhart PJ, Davis DO, et al., 2013. Effect of boundary-layer bleed hole inclination angle and scaling on flow coefficient behavior. Proceedings of the 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.

[9]Gupta R, Hussain SA, Condoor S, et al., 2016. Numerical study on performance of scramjet intake with boundary layer bleed. International Journal of Control Theory and Applications, 9(17):8785-8793.

[10]Hamed A, Manavasi S, Shin D, et al., 2011. Bleed interactions in supersonic flow. International Journal of Flow Control, 3(1):37-48.

[11]Hu JX, Zhang WH, Xia ZX, et al., 2013. Scramjet Propulsion Technology. Publication of National University of Defense Technology, Changsha, China, p.120-123 (in Chinese).

[12]Im SK, Do H, 2018. Unstart phenomena induced by flow choking in scramjet inlet-isolators. Progress in Aerospace Sciences, 97:1-21.

[13]Jiao XL, 2017. Research on Hypersonic Inlet Unstart Multimodes and Mode Transition. PhD Thesis, Harbin Institute of Technology, Harbin, China (in Chinese).

[14]Mahoney JJ, 1990. Inlets for Supersonic Missiles. American Institute of Aeronautics and Astronautics, Washington DC, USA, p.67-84.

[15]Martin PG, Hodges J, Duveau P, et al., 2007. A Study of the Aerodynamics of a Supersonic Intake Compression Surface with Perforated Bleed Using CFD Methods. Technical Report No. GARTEUR TP 161, Group for Aeronautical Research and Technology in Europe, Europe.

[16]Sepahi-Younsi J, Feshalami BF, Maadi SR, et al., 2019. Boundary layer suction for high-speed air intakes: a review. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 233(9):3459-3481.

[17]Soltani MR, Younsi JS, Farahani M, 2015. Effects of boundary-layer bleed parameters on supersonic intake performance. Journal of Propulsion and Power, 31(3):826-836.

[18]Syberg J, Hickcox TE, 1973. Design of a Bleed System for a Mach 3.5 Inlet. Technical Report No. NASA CR 2187, National Aeronautics and Space Administration, Washington DC, USA.

[19]Tan HJ, Sun S, Yin ZL, 2009. Oscillatory flows of rectangular hypersonic inlet unstart caused by downstream mass-flow choking. Journal of Propulsion and Power, 25(1):138-147.

[20]Wang QC, Wang ZG, Zhao YX, 2017. The impact of streamwise convex curvature on the supersonic turbulent boundary layer. Physics of Fluids, 29(11):116106.

[21]Wang Y, 2017. Influence of Suction on Restart Characteristics of Hypersonic Inlet. MS Thesis, Harbin Institute of Technology, Harbin, China (in Chinese).

[22]Wang ZG, Zhao YL, Zhao YX, et al., 2015. Prediction of massive separation of unstarted inlet via free-interaction theory. AIAA Journal, 53(4):1108-1112.

[23]Willis BP, Davis DO, Hingst WR, 1995. Flow coefficient behavior for boundary layer bleed holes and slots. Proceedings of the 33rd Aerospace Sciences Meeting and Exhibit.

[24]Wukie NA, Orkwis PD, Turner MG, et al., 2015. Simulations and models for aspirations in a supersonic flow using overflow. AIAA Journal, 53(7):2052-2056.

[25]Zhang MZ, 2018. Bleed System Design of a Supersonic Rectangular-duct Wind Tunnel. MS Thesis, University of Florida, Gainesville, USA.

[26]Zhang WH, Liu J, Ding F, et al., 2019. Novel integration methodology for an inward turning waverider forebody/ inlet. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 20(12):918-926.

[27]Zhao J, 2016. Research on Flow field Structure in Supersonic Boundary Layer Bleed Holes and Slots. MS Thesis, National University of Defense and Technology, Changsha, China (in Chinese).

[28]Zhao J, Fan XQ, Wang Y, et al., 2017. Classification of flow field in supersonic boundary layer bleed slot. Journal of Propulsion Technology, 38(11):2463-2470 (in Chinese).

[29]Zhao YL, 2014. Study of Separated Flow Modeling and Unstart Mechanism of Hypersonic Inlet. PhD Thesis, National University of Defense Technology, Changsha, China (in Chinese).