CLC number: Q819
On-line Access: 2020-11-11
Received: 2020-06-08
Revision Accepted: 2020-09-04
Crosschecked: 2020-10-28
Cited: 0
Clicked: 3433
Hamed Ramezani, Lu-yu Zhou, Lei Shao, Yong He. Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization[J]. Journal of Zhejiang University Science A,in press.Frontiers of Information Technology & Electronic Engineering,in press.https://doi.org/10.1631/jzus.A2000261 @article{title="Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization", %0 Journal Article TY - JOUR
同轴生物3D打印器官原型--从营养输送到血管化关键词组: Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article
Reference[1]Abraham LC, Zuena E, Perez-Ramirez, et al., 2008. Guide to collagen characterization for biomaterial studies. Journal of Biomedical Materials Research-Part B Applied Biomaterials, 87B(1):264-285. [2]Aguado BA, Mulyasasmita W, Su J, et al., 2012. Improving viability of stem cells during syringe needle flow through the design of hydrogel cell carriers. Tissue Engineering Part A, 18(7-8):806-815. [3]Ashammakhi N, Ahadian S, Xu C, et al., 2019. Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs. Materials Today Bio, 1:100008. [4]Attalla R, Ling C, Selvaganapathy P, 2016. Fabrication and characterization of gels with integrated channels using 3D printing with microfluidic nozzle for tissue engineering applications. Biomedical Microdevices, 18(1):17. [5]Axpe E, Oyen ML, 2016. Applications of alginate-based bioinks in 3D bioprinting. International Journal of Molecular Sciences, 17(12):1976. [6]Bertassoni LE, Cecconi M, Manoharan V, et al., 2014. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs. Lab on a Chip, 14(13):2202-2211. [7]Blaeser A, Duarte Campos DF, Fischer H, 2017. 3D bioprinting of cell-laden hydrogels for advanced tissue engineering. Current Opinion in Biomedical Engineering, 2:58-66. [8]Chung JHY, Naficy S, Yue ZL, et al., 2013. Bio-ink properties and printability for extrusion printing living cells. Biomaterials Science, 1(7):763-773. [9]Colosi C, Shin SR, Manoharan V, et al., 2016. Microfluidic bioprinting of heterogeneous 3D tissue constructs using low-viscosity bioink. Advanced Materials, 28(4):677-684. [10]Cornelissen DJ, Faulkner-Jones A, Shu WM, 2017. Current developments in 3D bioprinting for tissue engineering. Current Opinion in Biomedical Engineering, 2:76-82. [11]Costantini M, Colosi C, Świȩszkowski W, et al., 2018. Co-axial wet-spinning in 3D bioprinting: state of the art and future perspective of microfluidic integration. Biofabrication, 11(1):012001. [12]Das S, Basu B, 2019. An overview of hydrogel-based bioinks for 3D bioprinting of soft tissues. Journal of the Indian Institute of Science, 99(3):405-428. [13]Datta P, Ayan B, Ozbolat IT, 2017. Bioprinting for vascular and vascularized tissue biofabrication. Acta Biomaterialia, 51:1-20. [14]Dolati F, Yu Y, Zhang YH, et al., 2014. In vitro evaluation of carbon-nanotube-reinforced bioprintable vascular conduits. Nanotechnology, 25(14):145101. [15]Duarte Campos DF, Blaeser A, Buellesbach K, et al., 2016. Bioprinting organotypic hydrogels with improved mesenchymal stem cell remodeling and mineralization properties for bone tissue engineering. Advanced Healthcare Materials, 5(11):1336-1345. [16]Gao Q, He Y, Fu JZ, et al., 2015. Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. Biomaterials, 61:203-215. [17]Gao Q, Liu ZJ, Lin ZW, et al., 2017. 3D bioprinting of vessel-like structures with multilevel fluidic channels. ACS Biomaterials Science & Engineering, 3(3):399-408. [18]George M, Abraham TE, 2006. Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan —a review. Journal of Controlled Release, 114(1):1-14. [19]Glowacki J, Mizuno S, 2008. Collagen scaffolds for tissue engineering. Biopolymers, 89(5):338-344. [20]Gómez-Guillén MC, Giménez B, López-Caballero ME, et al., 2011. Functional and bioactive properties of collagen and gelatin from alternative sources: a review. Food Hydrocolloids, 25(8):1813-1827. [21]Griffith CK, Miller C, Sainson RCA, et al., 2005. Diffusion limits of an in vitro thick prevascularized tissue. Tissue Engineering, 11(1-2):257-266. [22]Guvendiren M, Molde J, Soares RMD, et al., 2016. Designing biomaterials for 3D printing. ACS Biomaterials Science & Engineering, 2(10):1679-1693. [23]Hann SY, Cui HT, Esworthy T, et al., 2019. Recent advances in 3D printing: vascular network for tissue and organ regeneration. Translational Research, 211:46-63. [24]Haycock JW, 2011. 3D cell culture: a review of current approaches and techniques. In: Haycock JW (Ed.), 3D Cell Culture. Humana Press, New York, USA, p.1-15. [25]He Y, Yang FF, Zhao HM, et al., 2016. Research on the printability of hydrogels in 3D bioprinting. Scientific Reports, 6:29977. [26]He Y, Xie M, Gao Q, et al., 2019. Why choose 3D bioprinting? Part I: a brief introduction of 3D bioprinting for the beginners. Bio-Design and Manufacturing, 2:221-224. [27]He Y, Gu Z, Xie M, et al., 2020. Why choose 3D bioprinting? Part II: methods and bioprinters. Bio-Design and Manufacturing, 3:1-4. [28]Helary C, Bataille I, Abed A, et al., 2010. Concentrated collagen hydrogels as dermal substitutes. Biomaterials, 31(3):481-490. [29]Hennink WE, van Nostrum CF, 2012. Novel crosslinking methods to design hydrogels. Advanced Drug Delivery Reviews, 64(S1):223-236. [30]Hong S, Kim JS, Jung B, et al., 2019. Coaxial bioprinting of cell-laden vascular constructs using a gelatin-tyramine bioink. Biomaterials Science, 7(11):4578-4587. [31]Ji S, Almeida E, Guvendiren M, 2019. 3D bioprinting of complex channels within cell-laden hydrogels. Acta Biomaterialia, 95:214-224. [32]Jia WT, Gungor-Ozkerim PS, Zhang YS, et al., 2016. Direct 3D bioprinting of perfusable vascular constructs using a blend bioink. Biomaterials, 106:58-68. [33]Kolesky DB, Truby RL, Gladman AS, et al., 2014. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs. Advanced Materials, 26(19):3124-3130. [34]Kuijpers AJ, van Wachem PB, van Luyn MJA, et al., 2000. In vivo compatibility and degradation of crosslinked gelatin gels incorporated in knitted Dacron. Journal of Biomedical Materials Research, 51(1):136-145. [35]Kyle S, Jessop ZM, Al-Sabah A, et al., 2017. ‘Printability’ of candidate biomaterials for extrusion based 3D printing: state-of-the-art. Advanced Healthcare Materials, 6(16):1700264. [36]Lee A, Hudson AR, Shiwarski DJ, et al., 2019. 3D bioprinting of collagen to rebuild components of the human heart. Science, 365(6452):482-487. [37]Lee JM, Yeong WY, 2016. Design and printing strategies in 3D bioprinting of cell-hydrogels: a review. Advanced Healthcare Materials, 5(22):2856-2865. [38]Lee JY, Koo YW, Kim GH, 2018. Innovative cryopreservation process using a modified core/shell cell-printing with a microfluidic system for cell-laden scaffolds. ACS Applied Materials & Interfaces, 10(11):9257-9268. [39]Lee VK, Kim DY, Ngo H, et al., 2014. Creating perfused functional vascular channels using 3D bio-printing technology. Biomaterials, 35(28):8092-8102. [40]Liu F, Chen QH, Liu C, et al., 2018. Natural polymers for organ 3D bioprinting. Polymers, 10(11):1278. [41]Liu WJ, Heinrich MA, Zhou YX, et al., 2017. Extrusion bioprinting of shear-thinning gelatin methacryloyl bioinks. Advanced Healthcare Materials, 6(12):1601451. [42]Liu WJ, Zhong Z, Hu N, et al., 2018. Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments. Biofabrication, 10(2):024102. [43]Madl CM, Katz LM, Heilshorn SC, 2016. Bio-orthogonally crosslinked, engineered protein hydrogels with tunable mechanics and biochemistry for cell encapsulation. Advanced Functional Materials, 26(21):3612-3620. [44]Maiullari F, Costantini M, Milan M, et al., 2018. A multi-cellular 3D bioprinting approach for vascularized heart tissue engineering based on HUVECs and iPSC-derived cardiomyocytes. Scientific Reports, 8(1):13532. [45]Mandrycky C, Wang ZJ, Kim K, et al., 2016. 3D bioprinting for engineering complex tissues. Biotechnology Advances, 34(4):422-434. [46]McBeth C, Lauer J, Ottersbach M, et al., 2017. 3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts. Biofabrication, 9(1):015009. [47]Miller JS, Stevens KR, Yang MT, et al., 2012. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues. Nature Materials, 11(9):768-774. [48]Mironov V, Trusk T, Kasyanov V, et al., 2009. Biofabrication: a 21st Century manufacturing paradigm. Biofabrication, 1(2):022001. [49]Mistry P, Aied A, Alexander M, et al., 2017. Bioprinting using mechanically robust core–shell cell-laden hydrogel strands. Macromolecular Bioscience, 17(6):1600472. [50]Murphy SV, Atala A, 2014. 3D bioprinting of tissues and organs. Nature Biotechnology, 32(8):773-785. [51]Nagel T, Kelly DJ, 2013. The composition of engineered cartilage at the time of implantation determines the likelihood of regenerating tissue with a normal collagen architecture. Tissue Engineering Part A, 19(7-8):824-833. [52]Ng WL, Chua CK, Shen YF, 2019. Print me an organ! why we are not there yet. Progress in Polymer Science, 97: 101145. [53]Onoe H, Okitsu T, Itou A, et al., 2013. Metre-long cell-laden microfibres exhibit tissue morphologies and functions. Nature Materials, 12(6):584-590. [54]Ouyang LL, Yao R, Zhao Y, et al., 2016. Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells. Biofabrication, 8(3):035020. [55]Ouyang LL, Highley CB, Sun W, et al., 2017. A generalizable strategy for the 3D bioprinting of hydrogels from nonviscous photo-crosslinkable inks. Advanced Materials, 29(8):1604983. [56]Ozbolat IT, Chen H, Yu Y, 2014. Development of ‘Multi-arm bioprinter’ for hybrid biofabrication of tissue engineering constructs. Robotics and Computer-Integrated Manufacturing, 30(3):295-304. [57]Parenteau-Bareil R, Gauvin R, Berthod F, 2010. Collagen-based biomaterials for tissue engineering applications. Materials, 3(3):1863-1887. [58]Park J, Lee SJ, Chung S, et al., 2017. Cell-laden 3D bioprinting hydrogel matrix depending on different compositions for soft tissue engineering: characterization and evaluation. Materials Science and Engineering: C, 71:678-684. [59]Paulsen SJ, Miller JS, 2015. Tissue vascularization through 3D printing: will technology bring us flow? Developmental Dynamics, 244(5):629-640. [60]Pawar SN, Edgar KJ, 2012. Alginate derivatization: a review of chemistry, properties and applications. Biomaterials, 33(11):3279-3305. [61]Pereira RF, Bártolo PJ, 2015. 3D bioprinting of photocrosslinkable hydrogel constructs. Journal of Applied Polymer Science, 132(48):42458. [62]Persikov AV, Ramshaw JAM, Kirkpatrick A, et al., 2005. Electrostatic interactions involving lysine make major contributions to collagen triple-helix stability. Biochemistry, 44(5):1414-1422. [63]Pi QM, Maharjan S, Yan X, et al., 2018. Digitally tunable microfluidic bioprinting of multilayered cannular tissues. Advanced Materials, 30(43):1706913. [64]Pinnock CB, Meier EM, Joshi NN, et al., 2016. Customizable engineered blood vessels using 3D printed inserts. Methods, 99:20-27. [65]Radisic M, Yang LM, Boublik J, et al., 2004. Medium perfusion enables engineering of compact and contractile cardiac tissue. American Journal of Physiology-Heart and Circulatory Physiology, 286(2):H507-H516. [66]Rouwkema J, Rivron NC, van Blitterswijk CA, 2008. Vascularization in tissue engineering. Trends in Biotechnology, 26(8):434-441. [67]Rücker M, Laschke MW, Junker D, et al., 2006. Angiogenic and inflammatory response to biodegradable scaffolds in dorsal skinfold chambers of mice. Biomaterials, 27(29):5027-5038. [68]Sasmal P, Datta P, Wu Y, et al., 2018. 3D bioprinting for modelling vasculature. Microphysiological Systems, 2:9. [69]Sekine H, Shimizu T, Sakaguchi K, et al., 2013. In vitro fabrication of functional three-dimensional tissues with perfusable blood vessels. Nature Communications, 4:1399. [70]Shao L, Gao Q, Zhao HM, et al., 2018. Fiber-based mini tissue with morphology-controllable gelma microfibers. Small, 14(44):1802187. [71]Shao L, Gao Q, Xie CQ, et al., 2019. Bioprinting of cell-laden microfiber: can it become a standard product? Advanced Healthcare Materials, 8(9):1900014. [72]Shao L, Gao Q, Xie CQ, et al., 2020a. Directly coaxial 3D bioprinting of large-scale vascularized tissue constructs. Biofabrication, 12(3):035014. [73]Shao L, Gao Q, Xie CQ, et al., 2020b. Synchronous 3D bioprinting of large-scale cell-laden constructs with nutrient networks. Advanced Healthcare Materials, 9(15):1901142. [74]Shaw CJ, Ter Haar GR, Rivens IH, et al., 2014. Pathophysiological mechanisms of high-intensity focused ultrasound-mediated vascular occlusion and relevance to non-invasive fetal surgery. Journal of the Royal Society Interface, 11(95):20140029. [75]Spang MT, Christman KL, 2018. Extracellular matrix hydrogel therapies: in vivo applications and development. Acta Biomaterialia, 68:1-14. [76]Suntornnond R, An J, Yeong WY, et al., 2015. Biodegradable polymeric films and membranes processing and forming for tissue engineering. Macromolecular Materials and Engineering, 300(9):858-877. [77]Suntornnond R, An J, Chua CK, 2017. Bioprinting of thermoresponsive hydrogels for next generation tissue engineering: a review. Macromolecular Materials and Engineering, 302(1):1600266. [78]Townsend JM, Beck EC, Gehrke SH, et al., 2019. Flow behavior prior to crosslinking: the need for precursor rheology for placement of hydrogels in medical applications and for 3D bioprinting. Progress in Polymer Science, 91:126-140. [79]Unagolla JM, Jayasuriya AC, 2020. Hydrogel-based 3D bioprinting: a comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives. Applied Materials Today, 18:100479. [80]van den Bulcke AI, Bogdanov B, de Rooze N, et al., 2000. Structural and rheological properties of methacrylamide modified gelatin hydrogels. Biomacromolecules, 1(1):31-38. [81]Wang XH, He K, Zhang WM, 2013. Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane-cell/hydrogel construct. Journal of Bioactive and Compatible Polymers, 28(4):303-319. [82]Wang XH, Ao Q, Tian XH, et al., 2017. Gelatin-based hydrogels for organ 3D bioprinting. Polymers, 9(9):401. [83]Wu ZJ, Su X, Xu YY, et al., 2016. Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation. Scientific Reports, 6:24474. [84]Xie M, Gao Q, Fu J, et al., 2020a. Bioprinting of novel 3D tumor array chip for drug screening. Bio-Design and Manufacturing, 3:175-188. [85]Xie M, Zheng Y, Gao Q, et al., 2020b. Facile 3D cell culture protocol based on photocurable hydrogels. Bio-Design and Manufacturing, in press. [86]Xing Q, Yates K, Vogt C, et al., 2014. Increasing mechanical strength of gelatin hydrogels by divalent metal ion removal. Scientific Reports, 4:4706. [87]Yao R, Zhang RJ, Yan YN, et al., 2009. In vitro angiogenesis of 3D tissue engineered adipose tissue. Journal of Bioactive and Compatible Polymers, 24(1):5-24. [88]Yeo MG, Lee JS, Chun W, et al., 2016. An innovative collagen-based cell-printing method for obtaining human adipose stem cell-laden structures consisting of core-sheath structures for tissue engineering. Biomacromolecules, 17(4):1365-1375. [89]Yu Y, Zhang YH, Martin JA, et al., 2013. Evaluation of cell viability and functionality in vessel-like bioprintable cell-laden tubular channels. Journal of Biomechanical Engineering, 135(9):091011. [90]Zhang LW, Li GY, Shi M, et al., 2017. Establishment and characterization of an acute model of ocular hypertension by laser-induced occlusion of episcleral veins. Investigative Ophthalmology & Visual Science, 58(10):3879-3886. [91]Zhang Y, Zhou DZ, Chen JW, et al., 2019. Biomaterials based on marine resources for 3D bioprinting applications. Marine Drugs, 17(10):555. [92]Zhang YH, Yu Y, Chen H, et al., 2013. Characterization of printable cellular micro-fluidic channels for tissue engineering. Biofabrication, 5(2):025004. [93]Zhang YH, Yu Y, Akkouch A, et al., 2015. In vitro study of directly bioprinted perfusable vasculature conduits. Biomaterials Science, 3(1):134-143. [94]Zhang YS, Arneri A, Bersini S, et al., 2016. Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. Biomaterials, 110: 45-59. Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou
310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE |
Open peer comments: Debate/Discuss/Question/Opinion
<1>