Abstract: high pressure sodium (HPS) lamp has been widely used in street lighting applications because of its maturity, reliability, high lighting efficiency, long life-time, and low cost. light emitting diode (LED) is expected as the next generation lighting source due to its continuously improving luminous efficacy, better color characteristic, and super long life-time. The two lighting sources may coexist in street lighting applications for a long time. A novel HPS and LED compatible driver is proposed which is rather suitable and flexible for driving HPS and LED in street lighting applications. The proposed driver combines the LLC and LCC resonant circuits into a flexible resonant tank. The flexible resonant tank may change to LLC or isolated LCC circuit according to the lighting source. It inherits the traditional HPS and LED drivers’ zero voltage switching (ZVS) characteristics and dimmable function. The design of the proposed flexible resonant tank considers the requirements of both HPS and LED. The experiments of driving HPS and LED on a prototype driver show that the driver can drive the two lighting sources flexibly with high efficiency.

一种基于可变谐振腔的高压钠灯与LED兼容性驱动器

[1]Alonso, J.M., Calleja, A.J., Lopez, E., et al., 2003. Analysis and design of a HID lamp ballast with sinusoidal waveform superposed with 3rd harmonic. IEEE 34th Annual Power Electronics Specialist Conf., p.971-976.

[2]Azevedo, I.L., Morgan, M.G., Morgan, F., 2009. The transition to solid-state lighting. Proc. IEEE, 97(3):481-510.

[3]Cardesin, J., Alonso, J.M., Lopez-Corominas, E., et.al., 2005. Small-signal analysis of a low-cost power control for LCC series-parallel inverters with resonant current mode control for HID lamps. IEEE Trans. Power Electron., 20(5):1205-1212.

[4]Chang, H.S., Lee, B.H., Park, H.N., et al., 2012. Design of dual output LLC resonant converter for a high-power LED lamp. 15th Int. Conf. on Electrical Machines and Systems, p.1-4.

[5]Chen, Y., Wu, X., Qian, Z., et al., 2011. Design and optimization of a wide output voltage range LED driver based on LLC resonant topology. IEEE 8th Int. Conf. on Power Electronics - ECCE Asia, p.2831-2837.

[6]Cheng, C.A., Cheng, H.L., Ku, C.W., et al., 2014. Design and implementation of a single-stage acoustic-resonance-free HID lamp ballast with PFC. IEEE Trans. Power Electron., 29(4):1966-1976.

[7]Cheong, C.K., Cheng, K.W.E., Chan, H.L., 2006. Examination of T8-T5 electronic ballast adaptor. 2nd Int. Conf. on Power Electronics Systems and Applications, p.170-172.

[8]Choi, S.C., Jung, D.Y., Kim, J.H., et al., 2013. Control of multi-functional rapid charger for electric vehicle. IEEE Int. Symp. on Industrial Electronics, p.1-6.

[9]Correa, J., Ponce, M., Arau, J., et al., 2002. Dimming in metal-halide and HPS lamps operating at HF: effects and modeling. 37th IAS Annual Meeting. Conf. Record of the Industry Applications Conf., p.1467-1474.

[10]Costantini, A., Cavalera, G., Pepino, A., et al., 2011. A CMOS low-power SoC for HID and LED lamps ballast. 7th Conf. on Ph.D. Research in Microelectronics and Electronics, p.109-112.

[11]Fang, X., Hu, H., Shen, Z.J., et al., 2012. Operation mode analysis and peak gain approximation of the LLC resonant converter. IEEE Trans. Power Electron., 27(4):1985-1995.

[12]Huang, C.M., Liang, T.J., Lin, R.L., et al., 2007. A novel constant power control circuit for HID electronic ballast. IEEE Trans. Power Electron., 22(5):1573-1582.

[13]IEC, 2006. IEC 61347-2-13:2006. Lamp Control Gear. Part 2-13: Particular Requirements for d.c. or a.c. Supplied Electronic Control Gear for LED Modules.

[14]IEC, 2011. IEC 60662:2011. High-Pressure Sodium Vapour Lamps-Performance Specifications.

[15]Kirsten, A.L., Dalla Costa, M.A., Rech, C., et al., 2013. Digital control strategy for HID lamp electronic ballasts. IEEE Trans. Ind. Electron., 60(2):608-618.

[16]Ko, S.H., Lim, S.H., Lee, S.R., et al., 2007. Operational characteristics of fault current limiting reactor combined with multi-functional invertor. IEEE 7th Int. Conf. on Power Electronics and Drive Systems, p.1719-1723.

[17]Lee, L.M., Hui, S.Y.R., 2009. Automatic lamp detection and operation for warm-start tubular fluorescent lamps. IEEE Trans. Power Electron., 24(12):2933-2941.

[18]Lovasoa, R.F., Zely, R.A., Dorin, L.D., et al., 2012. Energetic aspects of the HID ballast used in the outdoor lighting. Int. Conf. and Exposition on Electrical and Power Engineering, p.340-346.

[19]Lu, B., Liu, W., Liang, Y., et al., 2006. Optimal design methodology for LLC resonant converter. 21st Annual IEEE Applied Power Electronics Conf. and Exposition, p.533-538.

[20]Moksoon, J., Byounglo, L., Chongyeun, P., 2008. An optimal LCC design method for dimmable electronic ballasts of the HID lamp. IEEE Industry Applications Society Annual Meeting, p.1-8.

[21]Mu, H., Geng, L., Liu, J., 2011. A high precision constant current source applied in LED driver. IEEE Symp. on Photonics and Optoelectronics, p.1-4.

[22]Nan, C., Chung, H.S.H., 2011. A driving technology for retrofit LED lamp for fluorescent lighting fixtures with electronic ballasts. IEEE Trans. Power Electron., 26(2):588-601.

[23]Rodrigues, C., Guedes, L., Rodrigues, M., et al., 2009. Single electronic ballast for HPS and HPMV lamp testing. IEEE Power Electronics Conf., p.586-592.

[24]Schnell, R.W., Zane, R.A., Azcondo, F.J., 2013. Size reduction in low-frequency square-wave ballasts for high-intensity discharge lamps using soft-saturation magnetic material and digital control techniques. IEEE Trans. Power Electron., 28(2):1036-1046.

[25]Shrivastava, A., Singh, B., 2012. LLC series resonant converter based LED lamp driver with ZVS. IEEE 5th Power India Conf., p.1-5.

[26]Steigerwald, R.L., 1988. A comparison of half-bridge resonant converter topologies. IEEE Trans. Power Electron., 3(2):174-182.

[27]STMicroelectronics, 2015a. AN2708: 2X36 W Digital Dimmable Ballast with L6574 and ST7FDALI. Available from http://www.st.com/web/en/resource/technical/document/application_note/CD00184169.pdf [Accessed on Feb. 6, 2015].

[28]STMicroelectronics, 2015b. AN3106: 48 V-130 W High-Efficiency Converter with PFC for LED Street Lighting Applications. Available from http://www.st.com/web/en/resource/technical/document/application_note/CD00256070.pdf [Accessed on Feb. 6, 2015].

[29]Tan, S.C., 2010. General level driving approach for improving electrical-to-optical energy-conversion efficiency of fast-response saturable lighting devices. IEEE Trans. Ind. Electron., 57(4):1342-1353.

[30]Tomoroga, M., Jivet, I., Nicoara, D., 2012. Intelligent tele-management of street lighting equipped with HID lamps. 10th Int. Symp. on Electronics and Telecommunications, p.7-10.

[31]Visconti, P., Zizzari, G., Romanello, D., et al., 2011. Electronic board for driving of HID and LED lamps with auxiliary power supply from solar panel and presence detector. 10th Int. Conf. on Environment and Electrical Engineering, p.1-4.

[32]Wang, H., Liu, Z., Dong, J., 2011. High-power LED constant-current driver circuit design and efficiency analysis. Proc. IEEE Cross Strait Quad-Regional Radio Science and Wireless Technology Conf., p.705-710.

[33]Wang, Y., Zhang, X., Xu, D., et al., 2011. Design optimisation of the LCsCp resonant inverter to drive 1 kW high-pressure sodium lamps. IET Power Electron., 4(4):374-383.

[34]Wei, Y., Hui, S.Y.R., Chung, H.S.H., 2009. Energy saving of large-scale high-intensity-discharge lamp lighting networks using a central reactive power control system. IEEE Trans. Ind. Electron., 56(8):3069-3078.

[35]Wu, H., Ji, S., Lee, F.C., et al., 2011. Multi-channel constant current (MC 3) LLC resonant LED driver. IEEE Energy Conversion Congress and Exposition, p.2568-2575.

[36]Zhao, B., Song, Q., Liu, W., et al., 2013. Next-generation multi-functional modular intelligent UPS system for smart grid. IEEE Trans. Ind. Electron., 60(9):3602-3618.

[37]Zhu, J., Zhuo, F., Wang, Z., 2009. Design of a digital controller for high frequency HID lamp ballast. IEEE 6th Int. Power Electronics and Motion Control Conf., p.2516-2520.

[38]Zotos, N., Stergiopoulos, C., Anastasopoulos, K., et al., 2012. Case study of a dimmable outdoor lighting system with intelligent management and remote control. IEEE Int. Conf. on Telecommunications and Multimedia, p.43-48.