Full Text:   <4545>

Summary:  <2249>

CLC number: U264.1

On-line Access: 2024-08-27

Received: 2023-10-17

Revision Accepted: 2024-05-08

Crosschecked: 2015-07-20

Cited: 1

Clicked: 9069

Citations:  Bibtex RefMan EndNote GB/T7714

 ORCID:

Zheng Tan

http://orcid.org/0000-0002-6957-7006

Wen-ping Cao

http://orcid.org/0000-0002-8133-3020

-   Go to

Article info.
Open peer comments

Journal of Zhejiang University SCIENCE A 2015 Vol.16 No.8 P.616-621

http://doi.org/10.1631/jzus.A1400293


3D thermal analysis of a permanent magnet motor with cooling fans


Author(s):  Zheng Tan, Xue-guan Song, Bing Ji, Zheng Liu, Ji-en Ma, Wen-ping Cao

Affiliation(s):  1School of Electrical and Electronic Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK; more

Corresponding email(s):   w.cao@qub.ac.uk

Key Words:  Axial flux permanent magnet (AFPM) machine, Computational fluid dynamics (CFD), Cooling fan, Motor drives, Thermal analysis


Zheng Tan, Xue-guan Song, Bing Ji, Zheng Liu, Ji-en Ma, Wen-ping Cao. 3D thermal analysis of a permanent magnet motor with cooling fans[J]. Journal of Zhejiang University Science A, 2015, 16(8): 616-621.

@article{title="3D thermal analysis of a permanent magnet motor with cooling fans",
author="Zheng Tan, Xue-guan Song, Bing Ji, Zheng Liu, Ji-en Ma, Wen-ping Cao",
journal="Journal of Zhejiang University Science A",
volume="16",
number="8",
pages="616-621",
year="2015",
publisher="Zhejiang University Press & Springer",
doi="10.1631/jzus.A1400293"
}

%0 Journal Article
%T 3D thermal analysis of a permanent magnet motor with cooling fans
%A Zheng Tan
%A Xue-guan Song
%A Bing Ji
%A Zheng Liu
%A Ji-en Ma
%A Wen-ping Cao
%J Journal of Zhejiang University SCIENCE A
%V 16
%N 8
%P 616-621
%@ 1673-565X
%D 2015
%I Zhejiang University Press & Springer
%DOI 10.1631/jzus.A1400293

TY - JOUR
T1 - 3D thermal analysis of a permanent magnet motor with cooling fans
A1 - Zheng Tan
A1 - Xue-guan Song
A1 - Bing Ji
A1 - Zheng Liu
A1 - Ji-en Ma
A1 - Wen-ping Cao
J0 - Journal of Zhejiang University Science A
VL - 16
IS - 8
SP - 616
EP - 621
%@ 1673-565X
Y1 - 2015
PB - Zhejiang University Press & Springer
ER -
DOI - 10.1631/jzus.A1400293


Abstract: 
Overheating of permanent magnet (PM) machines has become a major technical challenge as it gives rise to magnet demagnetization, degradation of insulation materials, and loss of motor efficiency. This paper proposes a state-of-the-art cooling system for an axial flux permanent magnet (AFPM) machine with the focus on its structural optimization. A computational fluid dynamics (CFD) simulation with thermal consideration has been shown to be an efficient approach in the literature and is thus employed in this work. Meanwhile, a simplified numerical approach to the AFPM machine with complex configuration in 3D consisting of conduction, forced convection, and conjugate heat transfer is taken as a case study. Different simplification methods (including configuration and working conditions) and two optimized fans for forced convection cooling are designed and installed on the AFPM machine and compared to a natural convection cooling system. The results show that the proposed approach is effective for analyzing the thermal performance of a complex AFPM machine and strikes a balance between reasonable simplification, accuracy, and computational resource.

This paper deals with 3-D CFD thermal analysis of a permanent magnet motor with cooling fans. The authors designed two optimized fans for forced convection cooling. They have installed them on the axial flux permanent magnet (AFPM) machine for comparison with the nature convection cooling system. The results showed that the simplified numerical approach of the AFPM machine with a complex configuration in three-dimensions (3-D) is effective for analysing the thermal performance of the complex AFPM machine.

配有冷却风扇的永磁电机三维热分析

目的:提出一种适合永磁电机的冷却系统设计方案,降低电机本体温度。
创新点:提出一种适合永磁电机热分析的CFD仿真模型。
方法:采用计算流体动力学方法对包含冷却风扇的永磁电机进行空间三维热力学分析和优化设计。
结论:本文提出并优化后的冷却风扇可有效降低永磁电机的最高和平均温度。

关键词:轴向磁通永磁电机;计算流体动力学;冷却风扇;电机驱动;热分析

Darkslateblue:Affiliate; Royal Blue:Author; Turquoise:Article

Reference

[1]Boglietti, A., Cavagnino, A., Staton, D.A., 2005. TEFC induction motors thermal models: a parameter sensitivity analysis. IEEE Transactions on Industry Applications, 41(3):756-763.

[2]Chong, Y.C., Echenique-Subiabre, E.J.P., Mueller, M.A., et al., 2014. The ventilation effect on stator convective heat transfer of an axial flux permanent magnet machine. IEEE Transactions on Industrial Electronics, 61(8):4392-4403.

[3]Dong, J., Huang, Y., Jin, L., et al., 2014. Thermal optimization of a high-speed permanent magnet motor. IEEE Transactions on Magnetics, 50(2):749-752.

[4]Dorrrell, D.G., Staton, D.A., Hahout, J., et al., 2006. Linked electromagnetic and thermal modelling of a permanent magnet motor. 3rd IET International Conference on Power Electronics, Machines and Drives, Dublin, Ireland, p.536-540.

[5]El-Refaie, A.M., Harris, N.C., Jahns, T.M., et al., 2004. Thermal analysis of multibarrier interior PM synchronous machine using lumped parameter model. IEEE Transactions on Energy Conversion, 19(2):303-309.

[6]Hendershot, J.R., Miller, T.J.E., 1994. Design of Brushless Permanent Magnet Motors. Magna Physics and Oxford Science Publications, Oxford, UK.

[7]Lee, Y.S., Hahn, S., Kauh, S.K., 2000. Thermal analysis of induction motor with forced cooling channels. IEEE Transactions on Magnetics, 36(4):1398-1402.

[8]Mellor, P.H., Roberts, D., Turner, D.R., 1991. Lumped parameter thermal model for electrical machines of TEFC design. IEE Proceedings B (Electric Power Applications), 138(5):205-218.

[9]Mezani, S., Talorabet, N., Laporte, B., 2005. A combined electromagnetic and thermal analysis of induction motors. IEEE Transactions on Magnetics, 41(5):1572-1575.

[10]Trigeol, J.F., Bertin, Y., Lagonotte, P., 2006. Thermal modeling of an induction machine through the association of two numerical approaches. IEEE Transactions on Energy Conversion, 21(2):314-323.

[11]Wrobel, R., Vainel, G., Copeland, C., et al., 2013. Investigation of mechanical loss and heat transfer in an axial-flux PM machine. IEEE Energy Conversion Congress and Exposition, Denver, USA, p.4372-4379.

[12]Yu, Q., Laudensack, C., Gerling, D., 2010. Improved lumped parameter thermal model and sensitivity analysis for SR drives. XIX International Conference on Electrical Machines, Rome, Italy, p.1-6.

Open peer comments: Debate/Discuss/Question/Opinion

<1>

Please provide your name, email address and a comment





Journal of Zhejiang University-SCIENCE, 38 Zheda Road, Hangzhou 310027, China
Tel: +86-571-87952783; E-mail: cjzhang@zju.edu.cn
Copyright © 2000 - 2024 Journal of Zhejiang University-SCIENCE