[1] Benatar, J.G., Flatau, A.B., 2005. FEM implementation of a magnetostrictive transducer. Smart Structures and Materials, Proc. of SPIE, 5764:482-493.

[2] Besbes, M., Ren, Z., Razek, A., 2001. A generalized finite element model of magnetostriction phenomena. IEEE Transactions on Magnetics, 37(5):3324-3328.

[3] Claeyssen, F., Bossut, R., Boucher, D., 1990. Modeling and Characterization of the Magnetostricitive Coupling. Pro. Int. Work. Power Transducers for Sonics and Ultrasonics, Toulon, France, p.132-151.

[4] Claeyssen, F., Lhermet, N., le Letty, R., Bouchilloux, P., 1997. Actuators, transducers and motors based on giant magnetostrictive materials. Journal of Alloys and Compounds, 258:61-73.

[5] Dean, J., Gibbs, M.R.J., Schrefl, T., 2006. Finite-element analysis on cantilever beams coated with magnetostrictive material. IEEE Transactions on Magnetics, 42(2):283-288.

[6] Galopin, N., Mininger, X., Bouillault, F., Daniel, L., 2008. Finite element modeling of magnetoelectric sensors. IEEE Transactions on Magnetics, 44(6):834-837.

[7] Ghosh, D.P., Gopalakrishnan, S., 2007. A superconvergent finite element for composite beams with embedded magnetostrictive patches. Composite Structures, 79(3):315-330.

[8] Heinonen, E., Juuti, J., Leppävuori, S., 2005. Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software. Journal of the European Ceramic Society, 25:2467-2470.

[9] Hu, D.J., Liu, R.M., Li, X.Q., Xu, L.M., 1999. Research and development of full automatic CNC special machine for boring piston pin hole. Modular Machine Tool and Automatic Manufacturing Technique, 1:27-30 (in Chinese).

[10] Kaltenbacher, M., Schneider, S., Simkovics, R., 2001. Nonlinear Finite Element Anlysis of Magnetostrictive Transducers. Proceedings of SPIE’s 8th Annual International Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 4326:160-168.

[11] Karim, A., Mondher, B., Frederic, B., 2004. 3D FEM of magnetostriction phenomena using coupled constitutive laws. International Journal of Applied Electromagnetics and Mechanics, 19:367-371.

[12] Mo, X.P., Zhu, H.Q., Liu, J.G., 2000. Terfenol-D giant magnetostrictive transducer simulation by finite element method. Applied Acoustics, 19(4):5-8 (in Chinese).

[13] Perez-Aparicio, J.L., Sosa, H., 2004. A continuum three dimensional, fully coupled, dynamic, non-linear finite element formulation for magnetostrictive materials. Smart Materials and Structures, 13(3):493-502.

[14] Silva, F.S., 2006. Fatigue on engine pistons—A compendium of case studies. Engineering Failure Analysis, 13:480-492.

[15] Suhara, T., Takei, T., Takiguti, M., 1996. Characteristics of friction force on piston pin boss bearings. JSAE Review, 17(4):453.

[16] Watts, R., Gibbs, M.R.J., Karl, W.J., 1997. Finite-element modeling of magnetostrictive bending of a coated cantilever. Applied Physics Letters, 70(19):2607-2609.

[17] Weng, J.Y., Weng, S.Y., 1998. Machining principle and equipment of non-cylinder pin hole of piston. Shanghai Machine Tool, 1:22-24 (in Chinese).

[18] Zhai, P., Zhang, X.R., Wang, H.T., Qin, L., Wang, X.L., 2007. Research on machining principle for non-cylinder piston pin hole based on GMM. Piezoelectric & Acoustooptics, 29(1):125-128 (in Chinese).

[19] Zhang, K., Hu, D.J., Ma, H.Q., 2003. Research on boring mechanism for piston noncircular pin hole. Modular Machine Tool and Automatic Manufacturing Technique, 8:4-8 (in Chinese).